Phantom Power Supplies
ART Phantom II Dual Phantom Power Adapter |
|
 |
Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there's a certain amount of flexibility with matching Phantom Power voltage to your mic. CLICK HERE TO BUY |
ART Phantom III 48VDC Phantom Power Supply |
|
 |
A 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48-volt mic, you would obtain best results with 48 volts of phantom power. The Phantom III is a great choice for these needs. CLICK HERE TO BUY |
Audio Technica CP8506 48VDC 4-Channel Phantom Power Supply |
|
 |
These line-powered devices allow the use of remote-powered microphones with systems that do not supply phantom power. Each unit features a highly-regulated power supply which provides a constant voltage source, even with a heavily-loaded input. The regulator IC is internally protected to prevent overheating or damage even if shorted. The rugged steel case is finished in enamel and provides shielding from electrostatic interference. CLICK HERE TO BUY |
Audio Technica AT8801 48VDC Single Channel Phantom Power Supply |
|
 |
This line-powered device allows the use of remote-powered microphones with systems that do not supply phantom power. Each unit features a highly-regulated power supply which provides a constant voltage source, even with a heavily-loaded input. The regulator IC is internally protected to prevent overheating or damage even if shorted. CLICK HERE TO BUY |
Rolls PB223 Dual Phantom Power Adapter |
|
 |
The PB223 is for powering phantom powered microphones with 48VDC. Since the units use a 100KHz switching power supply there is no audio noise generated. CLICK HERE TO BUY |
Studio Projects SPPS 12VAC Power Supply for VTB1 |
|
 |
Grab a spare power supply for your Studio Projects VTB1 mic preamp. Once you've used a VTB1, you know you don't ever want to record without it. CLICK HERE TO BUY |