Recording
911 returned - Page 29 of 46
RaXXess Rack Rail |
|
 |
This great 11-gauge steel rack rail is punched and tapped for 10-32 in. screws. It is full hole rack rail with holes tapped at 5/8 in. - 5/8 in. - 1/2 in. Sold in pairs. Finished in a high-quality brushed black anodized finish. CLICK HERE TO BUY Raxxess |
RaXXess ERSS36 Studio Monitor Stands |
|
 |
These monitor stands are ideal for any studio and are constructed of 3/4" furniture grade hardboard, finished in a black oak laminate. The speaker platform and base are 12" square. The bottom is easily removed to allow the 5" center post to be filled with bagged sand for acoustical de-coupling. Sold in pairs, these stands are shipped knocked down in one box and assemble in minutes. CLICK HERE TO BUY Raxxess |
Wireless Microphone Stand Clip |
|
 |
Especially for use with wireless microphones, this tough Lexan clip holds the mic securely and allows "easy-on and easy-off" with a new quick release design. CLICK HERE TO BUY Rhythm Tech |
Rolls CL151 GLC Gate Limiter Compressor Microphone Preamp |
|
 |
The Rolls CL151 is a very versatile processor and can be used in any application where you need single channel mic or line level input processing. It is primarily designed for connecting studio mics to the inputs of hard disc recorders and has all the input stage processing power you need and an unbalanced 1/4 in. line level output. CLICK HERE TO BUY Rolls |
Rolls MSC106 Microphone Stand Adapter |
|
 |
The new MSC106 microphone stand adapter is perfect for mounting accessories such as headphone amplifiers, 1/2 rack effects, etc. CLICK HERE TO BUY Rolls |
Rolls MX28 Mini-Mix VI Mixer |
|
 |
The MX28 is a 3-channel true stereo line mixer. Each channel has an individual 1/4 in. input for the right and left sides, and the outputs are individual right and left 1/4 in. jacks. Each channel has a level and pan (balance) control. The Master Level controls the output volume and the Headphone Level controls the level to the 2 headphone outputs. CLICK HERE TO BUY Rolls |
Rolls MX56C MiniMix A/V Mixer |
|
 |
The MX56c, an upgrade to the Rolls MX56s, features 4 inputs including a mono 1/4 in. line input, a stereo 1/8 in. (3.5mm) line input, a balanced XLR microphone input with jumperable phantom power, and a stereo RCA line input. A variety of outputs have also been included on the MX56c. CLICK HERE TO BUY Rolls |
Rolls PB223 Dual Phantom Power Adapter |
|
 |
The PB223 is for powering phantom powered microphones with 48VDC. Since the units use a 100KHz switching power supply there is no audio noise generated. CLICK HERE TO BUY Rolls |
Rolls RM203X Stereo Line Mixer |
|
 |
The new Rolls RM203x Stereo Line Mixer is a line-level mixer with nine channels of stereo 1/4 in. inputs, a single XLR Mic Input, a Tape input and output provided via stereo RCA jacks, and a mono auxiliary send and stereo returns. Each channel has a signal Level control, a right/left Balance control, an Auxiliary level control, and a Clip LED indicator. CLICK HERE TO BUY Rolls |
Rolls RM65B 6 x 4 Mixer |
|
 |
Each channel of the RM65b has a monitor send, FX send, bass and treble controls, and a volume slider. Each XLR input has a trim control on the rear panel. CLICK HERE TO BUY Rolls |
Rode Boompole Telescoping Lightweight Microphone Boom Pole |
|
 |
Machined from high grade aluminum, the boom pole is designed for applications where a 3-meter extension pole for shotgun microphones is required. CLICK HERE TO BUY RODE |
Rode Classic II Tube Microphone |
|
 |
The Classic II is Rode's top-of-the-line studio condenser microphone. Classic by name and nature. Featuring a custom spec 1 in. dual diaphragm capsule feeding a vintage twin triode (New old stock) GE JAN-6072 valve and custom Jensen output transformer. The result? Classic warmth and richness on both vocals and acoustic instruments. CLICK HERE TO BUY RODE |
Rode Deadcat Microphone Wind Muff |
|
 |
Fits R0DE VideoMic, NTG-1, and NTG-2. CLICK HERE TO BUY RODE |
Rode D-PowerPlug Inline Cable Mounted Amplifier |
|
 |
The D-PowerPlug is effectively a ?Turbo Charger for Dynamic microphones! CLICK HERE TO BUY RODE |
Rode GN1 Gooseneck Mount for NT6 |
|
 |
The GN1 miniature goose neck mounting adaptor is designed to allow accurate positioning of the NT6 capsule into tight angles and spaces not normally CLICK HERE TO BUY RODE |
Rode K2 Tube Microphone |
|
 |
The RODE K2 delivers the ultimate in pure rich tube sound and performance, super low self noise, high max. SPL, and mega wide dynamic range. CLICK HERE TO BUY RODE |
Rode Mini-Boompole Microphone Boom |
|
 |
The Rode Mini Boompole is a new 3-piece telescopic version of Rode's best selling Boompole. Made of durable, lightweight, high grade aluminum, the 6 ft. Mini Boompole is ideal for use with the Rode Videomic and Rode stereo Videomic or any other mics you may need. CLICK HERE TO BUY RODE |
Rode NT1000 Studio Condenser Microphone |
|
 |
With its ultra low-noise transformer-less circuitry the Rode NT1000 brings new standards to the recording industry. CLICK HERE TO BUY RODE |