Electronics
Silent Drive Acoustic Enclosuremolex |
|
 |
Noise reducing hard drive sleeve for IDE drives CLICK HERE TO BUY Containing a dense acoustic barrier and a thin decoupling foam, the SilentDrive (tm) delivers a typical noise reduction of over 90%! This enclosure employs aluminum cold plates to transmit excess heat from the drive to the PC chassis, ensuring that overheating does not occur. Not suitable for SCSI drives. A high proportion of noise created by PCs comes from the hard drive(s). This is because the magnetic platters in the hard drive spin constantly at high speed. In addition, the heads moving back and forth across the platters cause "clicking" noises every time files are accessed by the operating system. Much research and development has been done by drive manufacturers in recent years to try to make hard drives quieter, but despite this, the noise most drives make is still very noticeable and distracting, even when using hard drives which are specifically marketed as being supposedly "quiet". The obvious solution is to enclose the drive in an acoustic sleeve and this is how SilentDrive™ works. However, the typical problem associated with acoustic enclosures is cooling - excessive heat is not healthy for a hard drive. The SilentDrive™ fully addresses this issue by having two aluminium "cold plates" which cover both the top and the bottom of the drive and conduct unwanted heat safely away into the surrounding air and chassis mountings. Reduces hard drive noise by over 90% Easily fits into new or existing computer Accepts all 1" high 3.5" drives Fits into a standard 5.25" (CDROM-sized) drive bay No special installation tools required Has cut-outs for breather hole, power, and IDE/SCSI ribbon cables Does not affect drive performance Gives extra shock protection during PC transit Sits behind the bay blanking plate, so does not affect aesthetics Lasts virtually forever! Buy one and transfer it every time you change your PC. Compatibility It has been proven that the SilentDrive™ has the ability to work safely with hard drives which dissipate up to around 6.8 watts of heat, keeping the running temperature under the 55°C maximum which is specified by most hard drive manufacturers. The "heat dissipation at idle" and maximum running temperature can easily be checked by looking at the specification sheet for your individual hard drive. Because the heat generated by a drive is related to the spindle speed, most drives with a spindle speed of 7,200 rpm (revolutions per minute) or less are compatible. Generally speaking, if your drive runs at 10,000 or 15,000 rpm then unfortunately it will run too hot to be enclosed. Click here for more info |
Behringer 1C Studio MonitorsBehringer |
|
 |
Ultra-Compact Monitor Speaker (pair) CLICK HERE TO BUY Our new MONITOR 1C is a compact high-performance 2-way loudspeaker system ideally suited for audio/video multimedia applications, home recording studios and surround-sound systems. It has a powerful 5 ½" woofer with an extremely light-weight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity. The result: an ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. Thanks to the 1C’s high power handling capability (100 Watts / IEC268-5) with auto overload protection that prevents tweeter damage and resets automatically, you get full-range output with extremely low distortion. Click here for more info |
Hartke 215BXL Bass CabinetHartke |
|
 |
Deep low end with a dual-ported cabinet design and two premium Hartke 15XL aluminum-cone drivers.Handles up to 400 watts at 4 ohms. Frequency response is 30 Hz to 1 kHz. CLICK HERE TO BUY The XL Series are simply legendary. No cabinet produces the smooth, rich, punchy attack of Hartke more faithfully than the XL Series. That is why they have been the choice of some of the world's finest bass players since their introduction. Click here for more info |
Hartke 4.5 XL Bass CabinetHartke |
|
 |
The ultimate Hartke. Four Hartke 10" drivers and a custom 5" high-frequency speaker in a tuned, ported cabinet. Handles up to 400 watts at 8 ohms.Wide frequency response of 30 Hz to 12 kHz for more coverage. CLICK HERE TO BUY The XL Series are simply legendary. No cabinet produces the smooth, rich, punchy attack of Hartke more faithfully than the XL Series. That is why they have been the choice of some of the world's finest bass players since their introduction Click here for more info |
400W Ultra Quiet Nexus Power SupplyNexus |
|
 |
Ultra High quality Quiet ATX Power Supply CLICK HERE TO BUY The Nexus NX-4000 Real Silent Power Supply is a true 400 Watt power supply and is again setting new standards! The NX-4000 is fitted with a wire grill and a premium quality fan. The NX-4000 produces only 21.7 dB(A) in idle mode! Your PC is in need of more power than average? But you do want your computer to be as quiet as possible? The Nexus NX-4000 will not let you down! Features: Real silent power supply, only 21.7 dB(A) in idle mode High efficiency Output over voltage protection Short circuit protection on all output Reset Table power shut down Approved by: TÜV, CSA, UL, NEMKO, FCC, CB & CE Internal 80mm fan with wiregrill Unique coupling of internal heat sink to the case of the power supply to increase overall heat dissipation area 100% burn-in under high ambient temperature (50oC) Vacuum-impregnated transformer MTBF: 100K hours at 25oC 100% Hi-pot tested Line input fuse protection Active PFC Complies with EN61000-3-2 AC input full range Specifications: Remote ON/OFF Control: The power supply shall accept a logic open collector level which will disable / enable all out put voltage (excluding +5V standby) Temperature range: operating 0oC~50oC storage -20oC~+80oC Temperature coefficient: 0.01% / oC Transient response: output voltage recovers in less than 1ms max. following a 25% load change Hold-up time: 17 ms minimum at full load & nominal input voltage Dielectric withstand: input / output 1800VAC for 1 second, input to frame ground 1800 for 1 second Humidity: 5~95% RH Efficiency: 65% min. 70% typical, at full load Power factor correction: > 0.96 at full load Power good signal: turn-on delay 100ms to 500ms Overload protection: 150% max. Inrush current: 80A cold, 120A warm at 132 VAC Over voltage protection: +5V : 6.82V(max.) +3.3V : 4.5V(max.) Output Characteristics: Minimum Normal Maximum Load REG. Line REG. Ripple & Noise Load Load load +3,3V 0.3A 14.0A 28.0A ±5% ±1% 50mV P-P +5V 0.5A 14.25A 40.0A ±5% ±1% 50mV P-P +12V 0.0A 6.0A 15.0A* ±5% ±1% 120mV P-P -12V 0.0A 0.4A 0.8A ±5% ±2% 120mV P-P -5V 0.0A 0.15A 0.3A ±5% ±2% 100mV P-P +5Vsb 0.0A 1.0A 2.0A ±5% ±1% 50mV P-P Click here for more info |
MOTU Micro Express MIDI InterfaceMOTU |
|
 |
4 in/6 out midi interface with SMPTE sync CLICK HERE TO BUY The micro Express is a mini version of the MIDI Express XT. It has many of the same features as the Express XT - except that it is smaller and even more affordable. The micro Express is a half-rack unit with 4 inputs and 6 outputs. Click here for more info |
MOTU Midi Timepiece AV, USBMOTU |
|
 |
8x8 MIDI interface/synchronizer/patchbay/merger CLICK HERE TO BUY Mark of the Unicorn introduces the MIDI Timepiece AV. Combine MIDI with ADATs (tm), ProTools (tm), or video. The MIDI Timepiece AV takes our world-renowned MIDI Time Piece II and adds synchronization that you really need, like video genlock, ADAT sync, and word clock sync. Even Digidesign superclock! Slave ADATs, Digidesign hardware or word-clock compatible devices to SMTPE and video. Drive your ADATs from your sequencer without an Alesis BRC (tm). Or control everything from an MMC controller like JL Cooper's CuePoint (tm). The MTP AV pulls it all together for stable, centralized, hassle-free synchronization and MIDI networking. For Macintosh (r), Windows (r), and stand-alone setups. The MTP AV is also an 8x8 merger and router. You can merge any combinations of the eight inputs simultaneously to any combination of the eight outputs. Because the MTP AV's internal memory can be programmed from the front panel,the MTP AV is the perfect choice for live performance applications where fast and flexible MIDI patching is essential. You can take the MTP AV on the road because it can operate with or without a computer. The MTP AV can be set to change scenes in response to patch changes, allowing remote control from any MIDI controller. Click here for more info |
Hartke 410XL Bass CabinetHartke |
|
 |
Classic Hartke. The 410XL features a twin chamber, dual-ported design and four 10"XL drivers. 400 Watt power handling at 8 Ohms and a frequency response of 30Hz to 5kHz. CLICK HERE TO BUY The XL Series are simply legendary. No cabinet produces the smooth, rich, punchy attack of Hartke more faithfully than the XL Series. That is why they have been the choice of some of the world's finest bass players since their introduction Click here for more info |
TC Electronic Dynamic EQTC Electronic |
|
 |
Dynamic EQ is a new tool for any mixing or mastering situation. This virtual processor eliminates the shortcomings of static EQ by providing a dynamically applied equalization. Requires TC Powercore hardware CLICK HERE TO BUY The Dynamic EQ plug-in offers up to four definable bands working either in static or dynamic mode, or in a mixture of both. Each of the bands can be configured as a parametric EQ or as a high or low shelving filter. The sidechain bands can be unlinked from the processing bands, so the high frequency content of a mix can control the low-end and vice versa. The pristine processing of this plug-in is all in 48-bit double precision, and may even be used in a phase linear mode, that is generous with transparent results. Dynamic EQ represents a new generation of mastering tools for the PowerCore platform and this virtual processor eliminates the shortcomings of static EQ by providing a marriage between dynamics processing and EQ. System Requirements Windows Powercore software version 1.9 or higher Windows XP PIII 1GHz or faster 256MB RAM (512MB recommended) VST compatible host application System must meet requirements of the host application Mac OS X Powercore software version 1.9 or higher MacOS X (10.2 or higher) G4/G5 (800MHz or faster) 256MB RAM (512MB recommended) VST or Audio Units compatible host application System must meet requirements of the host application Click here for more info |
Jim Dunlop CryBaby Multi WahJim Dunlop |
|
 |
The guitarist's premium "do it all" wah-wah pedal. Control over every parameter lets you sculpt the effect to your liking. Select the frequency centre of the effect, then dial in the breadth (frequency range) to be swept by the pedal's travel. From narrow and sharp to broad and subtle, this clean, noise-free wah puts the control in your hands (and foot). CLICK HERE TO BUY Controls: Pedal modulates sweep through wah effect Effect On/Bypass switch at toe-down position of pedal travel • Adjustable volume boost knob from 0 to +26dB, recessed underneath • Adjustable "Q" control modulates frequency breadth of effect, recessed underneath • Six-position knob selects frequency centre of effect, mounted on side Click here for more info |
Fostex VC-8 ADAT A-D/D-A ConverterFostex |
|
 |
20 bit ADAT Optical / Analogue converter CLICK HERE TO BUY Main Features Affordable ADAT Optical / Analogue converter 20-bit AD/DA performance S/P DIF / Analogue conversion Selectable clock - Internal (44.1kHz), Optical, Word (32-48kHz) enables seamless integration with digital equipment Input Mode select (2/4/8 buss) for easy combination with any analogue mixer Word In for sync Utilizes high quality 20bit AD/DA converters SUGGESTED APPLICATIONS Add analogue I/Os to digital recorders such as D824, D1624, D2424 to maximize the number of simultaneous recording tracks Add 8 high quality analog inputs and outputs to a PC sound card equipped with ADAT optical connection Click here for more info |
MOTU 828 MkII Firewire InterfaceMOTU |
|
 |
Now MkII, adding midi in/out, SMPTE, multiple DSP powered submixes, and 96 kHz sampling rate. CLICK HERE TO BUY The 828mkII contains everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation. The 828mkII provides 20 inputs and 22 outputs, including 10 channels of pristine 96kHz analog recording and playback, combined with 8 channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional 828 or 896 FireWire audio interfaces. The 828mkII is equally well-suited for studio and stage, with or without a computer. As a computer interface, the 828mkII provides 20 separate inputs and 22 outputs, including separate main outs and headphone out. The two mic/guitar/instrument inputs feature analog, pre-amplified sends which allow you to insert your favorite outboard EQ, compressor, guitar amp, reverb or other effects processor before the signal goes digital. Use any input as a return. You can add additional send/return loops using the 828mkII’s new CueMix DSP™ on-board mixing feature, a flexible DSP-driven 20-input/8-bus mixing and monitoring matrix that eliminates the need for an external mixer or patchbay. Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 828mkII’s main outs, headphone jack or any other output — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs, headphones and other outputs. Control everything from the included CueMix Console™ software or directly from the 828mkII’s front-panel. Need to hit the road? The 828mkII operates as a stand-alone mixer, with no computer required. Need to tweak your mix? Do it on the spot with the 828mII’s backlit LCD and front-panel controls. Every 828mkII setting can be accessed from the front panel. Back in the studio, 8 channels of ADAT optical digital I/O, plus stereo S/PDIF, make the 828mkII an ideal companion for a digital mixer. All digital I/O connections support standard sample rates up to 96kHz. The 828mkII includes 16-channels of MIDI input and output via the FireWire connection to the computer. Simply plug in your FireWire cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software. The 828mkII provides cross-platform compatibility with Mac OS 9, Mac OS X (version 10.2 or later) , Windows Me/2000/XP and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio/Sound Manager drivers. Or you can use the included AudioDesk workstation software for Macintosh, with 24-bit recording/editing and 32-bit mixing/processing/mastering. Click here for more info |
MOTU 2408 Expansion Rack for PCI-424MOTU |
|
 |
CLICK HERE TO BUY Click here for more info |
Mackie 808M Powered MixerMackie |
|
 |
8 channeled powered mixer CLICK HERE TO BUY 1200 real watts/2 ohms from twin 600-watt FR Series High-Current power amps, Power amps switchable as mains or main plus monitor, 8 mic/line channels with master phantom power, Dual line inputs on channels 7 and 8, Inserts on channels 1-6, Active 3-band EQ on each channel, 2 separate 9-band, audiophile-quality graphic EQs-- one on mains and one on monitor. A real Mackie Designs mic/line mixer section! Based on our world-famous MicroSeries 1202-VLZ and enhanced with new mic preamps and about a gazillion ingenious extra features. Rugged, sealed rotary controls resist dust, moisture and other contamination. Expensive, studio-grade, 9-band program equalizers for mains and monitor that utilize multiple summing amplifiers and precision infinite feedback band-pass filters, which yield superior linear-phase and combining properties. What this means is our graphic EQs are exceptionally low-noise, low-distortion, sound great, and don't suffer from any nasty phase-shift problems. Level-setting control & LED on every PPM mixer channel-makes setting input levels a snap. Mil-spec fiberglass circuit boards (instead of cheap phenolic) resist physical impact. Amp routing switch assigns power amps to mains or mains + monitors. Hefty 10,000µf storage capacitors for high peak power reserves. Massive toroid transformer for high current output. Click here for more info |
Mackie 808S Powered MixerMackie |
|
 |
8 channeled powered mixer CLICK HERE TO BUY 1200 real watts/2 ohms from twin 600-watt FR Series High-Current power amps, Power amps switchable as stereo mains or main plus monitor, 8 mic/line channels with master phantom power, Stereo line inputs on channels 7 and 8. Inserts on channels 1-6. Active 3-band EQ and stereo pan control on each channel. True stereo 9-band graphic EQ on mains. 9-band graphic EQ on monitor A real Mackie Designs mic/line mixer section! Based on our world-famous MicroSeries 1202-VLZ and enhanced with new mic preamps and about a gazillion ingenious extra features. Rugged, sealed rotary controls resist dust, moisture and other contamination. Expensive, studio-grade, 9-band program equalizers for mains and monitor that utilize multiple summing amplifiers and precision infinite feedback band-pass filters, which yield superior linear-phase and combining properties. What this means is our graphic EQs are exceptionally low-noise, low-distortion, sound great, and don't suffer from any nasty phase-shift problems. Level-setting control & LED on every PPM mixer channel-makes setting input levels a snap. Mil-spec fiberglass circuit boards (instead of cheap phenolic) resist physical impact. Amp routing switch assigns power amps to mains or mains + monitors. Hefty 10,000µf storage capacitors for high peak power reserves. Massive toroid transformer for high current output. Click here for more info |
MOTU 24 I/O Expansion Rack for PCI-424MOTU |
|
 |
Provides 24 inputs and outputs and 24 bit 96 kHz. CLICK HERE TO BUY Please note that this unit does not come with the PCI-424 card required to use with a computer system and is only an expansion option. The MOTU Audio 24I/O interface fulfills the promise of host-based hard disk recording: to record, edit, mix process, and master multitrack recording projects entirely inside the computer. It provides 24 high quality, 24-bit/96kHz analog inputs and outputs in a cost effective, single rack space package, allowing you to connect and record from 24 simultaneous analog sources. The 24I/O can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software. The 24I/O's front panel is essentially a dedicated meter bridge for your hard disk recording system. Audio activity for every input and output is represented by its own five-segment LED bar graph. Front Panel Power Switch Useful in the unlikely event you wish to turn off your 24I/O. An interesting fact about MOTU Audio interfaces is that they are hot swappable. This means you can power off, plug-in, add and remove interfaces without turning your computer off or restarting. In fact, if you already have a 2408mk3 or other PCI-424 system, adding a 24I/O is as easy as plugging in an AudioWire cable. 24-bit analog TRS Input and Output The 24 analog inputs and outputs are professional-grade TRS (balanced/unbalanced) connectors operating at either -10 dB or +4 dB. The input level can be switched via software in banks of eight inputs. In addition, CumixDSP provides continuously variable input trim with up to 12 dB boost per channel. Word Clock I/O The 24I/O audio interface provides industry standard word clock sync on a single BNC connector that can be programmed for input or output via software. When operating as a word clock input, the word connector allows the 24I/O to synchronize smoothly with today's digital audio studio. When operating as a word clock output, the word connector can be used as a master clock to drive other digital devices in your studio, such as a digital mixer. AudioWire The 24I/O uses the second generation AudioWire we introduced with the 2408mk3. It is a high-bandwidth digital audio format capable of carrying up to 24 channels of 96 kHz digital audio in and out of the computer at the same time. AudioWire can readily handle the 24 simultaneous inputs and outputs of the 24I/O audio interface. Power Supply Like all MOTU hardware products, the 24I/O comes with an internal power supply and standard detachable IEC power cable. No wall warts or line lumps. The 24I/O uses the same PCI-424 card that comes with the 2408mk3. You can connect up to four audio interfaces to a PCI-424 in any combination to create a system that fits your needs. An ideal companion for the 2408 The 24I/O adds 24 channels of high quality analog input and output to your MOTU Audio system. With that much I/O available, you can keep the outputs of your synthesizers and outboard effects patched into your computer at all times. It is a snap to route the output via the PCI-424 Console Software. The PCI-424 card features a powerful DSP chip dedicated to creating a custom tailored monitor mix of up to 96 channels of 96kHz audio. Because the mixing takes place on the card itself, instead of making the round trip from the PCI bus to the host processor, the system provides the same near-zero latency performance as today's latest digital mixers. CueMix DSP completely eliminates the buffer latency associated with monitoring on host-based systems. Because the DSP is mixing for you, your computer's CPU is free for other tasks. Cuemix DSP is the most flexible Cuemix ever, allowing you to mix multiple channels into multiple mix busses or directly assigned outputs. Manage your monitor mix with the intuitive Cuemix Console software included with the 24I/O. Click here for more info |
Hartke 810XL Bass CabinetHartke |
|
 |
The 810XL features eight 10" aluminum drivers in a highly dampened and sealed 3/4" and 5/8" composite plywood cabinet.The sound is rich, crisp and huge. Handling 800 watts at 4 ohms, the 810XL produces a frequency response of 40Hz - 5kHz. It has recessed 1/4" connections and handles, corner protection and rear casters for easy tilt-rolling CLICK HERE TO BUY The XL Series are simply legendary. No cabinet produces the smooth, rich, punchy attack of Hartke more faithfully than the XL Series. That is why they have been the choice of some of the world's finest bass players since their introduction Click here for more info |
Samson 8 Kit 8 Piece Drum Microphone SetSamson |
|
 |
The Samson 8KIT includes everything you need to completely mic today’s popular drum kit set-up in a professional live or studio application. All of the microphones in the 8KIT feature a cardioid pickup pattern voiced specifically for the drum they are capturing and Gold-plated XLR connections to insure a low noise signal path. The complete eight-piece kit comes packaged in a rugged road case for easy travel and secure storage. CLICK HERE TO BUY 2 C01 Large Diaphragm Condensers for overheads 3 Q-toms for dynamic tom micing with integrated rim mount clip 1 Q-snare with integrated rim mount clip for precise snare drum micing 1 Q-kick perfect for capture the low-end attack of bass drums 1 C02H Mini Pencil Condenser for hi-hat or ride cymbals All microphones feature Gold-plated XLR connections Complete kit comes packed in a rugged road case Click here for more info |
returned - Page 1 of 0