HiFi Speakers
Genelec 7060A Active Subwoofer (each)Genelec |
|
 |
Genelec 7060A LSE subwoofer with 29-85Hz frequency response and bass management. Black finish. CLICK HERE TO BUY Genelec 7060 Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 29 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations. The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers. The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch. The Genelec Laminar Spiral Enclosure (LSE) bass reflex cabinet is made of a sheet metal rolled into a spiral shape and clamped between thick MDF side panels. This new construction technique provides excellent laminar flow characteristics with minimal turbulence noise and enables an optimal packing of a very long reflex tube into a small space. Frequency response: 29 - 85 Hz (± 3 dB) 108 dB SPL short term @ 1m half space, averaged over 30-85 Hz 250 mm (10") driver LSE™ Power efficient port / enclosure design Highly configurable 6.1 channel Bass Manager Unparalleled low frequency performance Phase calibration tone RJ11 remote control connection SUM out and in for "daisy chaining" units Click here for more info |
Genelec 8040a Bi-Amplified Monitor(each)Genelec |
|
 |
Boasting performance comparable to much larger systems, but in a compact package, the bi-amplified 8040A is ideal for use in many situations where a wide frequency response is needed but space is limited. Uses include nearfield monitoring, project/home studios, workstations, broadcast and TV control rooms and mobile production vehicles. CLICK HERE TO BUY The ingenious, flow optimized, reflex port achieves clear deep bass articulation with no compression or port noises. Combined with the advanced Genelec Directivity Control Waveguide (DCW) and the rounded edges and gently curved front and sides of the MDE (Minimum Diffraction Enclosure) enclosure, the result is an astoundingly wide, flat frequency response both on and off axis. Other benefits include superb imaging qualities and less listening fatigue. Carefully designed crossover filters with steep roll-off feed dedicated amplifiers for each of the low distortion drivers. The 8040A includes magnetic shielding, overload protection circuitry and versatile room response controls as standard. Each 8040A comes with an Iso-Pod (Isolation Positioner/Decoupler) which eliminates coloration of the sound by decoupling the monitor from its mounting surface. The Iso-Pod also allows the speaker to be angled so that its acoustic axis points directly at the listener. For ideal mounting in differing environments, the 8040A includes integrated rear support points for floor and wall stands, with an additional M10 threaded mounting hole on the enclosure base. Click here for more info |
Genelec 8050A Bi-Amplified Monitor(each)Genelec |
|
 |
Capable of producing peak SPL of over 120dB per pair, and with a low frequency response extending down to 35Hz, the 8050A is a powerful wideband bi-amplified monitoring system. It is an excellent tool for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses. CLICK HERE TO BUY The sophisticated low level active crossover has versatile controls for matching the monitor to difficult acoustic environments. Dedicated very low distortion amplifiers power the drivers, with overload protection for each driver. The stiff, volume efficient MDE (Minimum Diffraction Enclosure) enclosure and long, curved, flow optimized reflex port combined with low distortion drivers provide solid, clear, low frequencies with a minimum of compression, distortion and port noise artefacts. The gently curved sided and front MDE enclosure and advanced Genelec Directivity Control Waveguide(DCW) provide exceptionally smooth on and off axis frequency responses, precise imaging and optimal directivity across the whole audio spectrum. Mounting of the 8050A is easy using the included Iso-Pod(Isolation Positioner/Decoupler) which eliminates coloration of the sound by decoupling the monitor from its mounting surface. The monitor can be tilted on the Iso-Pod to point the acoustic axis directly at the listening position. Other mounting options are possible using the integrated mounting point on the rear of the enclosure, or the M10 threaded hole on its base. Click here for more info |
Mipro ACT 2-Channel Reciever (LED)Mipro |
|
 |
ACT-707DE has LED panel that briefly displays channels, RF and AF metering. It has an "Interference-free Channel Auto Scan" button to auto search for non-interference channels with a simple one-press of a button. Concurrently, a simple one-press of the "ACT " button on the receiver will rapidly and automatically upload the working frequency into the transmitter. CLICK HERE TO BUY UHF Receiver Module Fixed Channels Dual channels Main Frame Size EIA Standard 1-rack Unit Main Frame Construction Metal Frame, Plastic Panel Display Status LED indicator displays channel and RF/AF metering. Operation Mode Manual Operation Reception Mode Dual tuners, true-diversity receiving that eliminates the signal dropouts of receiving dead points. Efficiently prevents interference of random noise radiated from karaoke machines, computers and DVD players, and avoid loud burst noise. Oscillation mode PLL Synthesized Stability ±0.005%(-10~50?) Bandwidth 24MHz Preprogrammed Frequencies Preset 16 frequencies per group Frequency Setup A simple 1-touch on channel button, it will scan full frequency band and search non-interference channels automatically. Just one-press on the "ACT" key will automatically locks the receiver and transmitter into the same working frequency, avoiding possible errors or mechanical breakdowns. Sensitivity At 40KHz deviation, 6 dBµV, at S/N>80dB Deviation Range ±40KHz, with level limiting S/N Ratio >105dB(1KHz-A) T.H.D. Click here for more info |
EMES Amber ActiveHR (for black/violetts)Emes |
|
 |
Combine with ‘Blacks & Violetts’, Power handling RMS: 480W. Price for single unit CLICK HERE TO BUY active Sub-Woofer & LF-unit with 10" dual coil driver long excursion driver +/- 20mm 4 amplifier controle one woofer 3 XLR In's and 3 Out's (filtered, or woofer bypassed) Amplifier section removeable Cabinet sizes matches with VIOLETT HR, BLACK tv HR and BLUE HR models - to build a 3 way system 36 Hz (-3dB point) EMES have designed this monitor for everyone that loves to have the most detailed precision possible, while mixing, editing and/or mastering! Only highest quality components - like the 18cm Carbon/Paper woofer, and the unusual 28mm silk dome - are used to reach a perfectly matched system. In any combination of 2 - 6 channel systems we garanty a max pair difference of +- 0,5 dB A very extreme design feature to the violett HR is the very, very low x-over frequency of 1.200 Hz. They always try to go as low as possible in a two way system, because all woofers with a diameter over 10cm allready "break up" (uncontrolled polarity pattern) very early (1 kHz). A perfect system for all applications within a listening distance from 80 to 300cm Click here for more info |
HK Audio EL2 satellite add-on packageHK Audio |
|
 |
Satellite EL2 Accessory Pack (2 x poles, 2 x 3m cables, 1 x bag). CLICK HERE TO BUY Satellite EL2 Accessory Pack (2 x poles, 2 x 3m cables, 1 x bag). Click here for more info |
EMES Amber Active subwoofer (for Pink)Emes |
|
 |
Combine with "Black" and "Violett" monitors for surround sound. Price for single unit. CLICK HERE TO BUY active Sub-Woofer & LF-unit with 10" dual coil driver long excursion driver +/- 20mm 4 amplifier controle one woofer 3 XLR In's and 3 Out's (filtered, or woofer bypassed) Amplifier section removeable Cabinet sizes matches with PINK tv, WHITE tv and GREEN tv models We have designed this monitor for everyone that loves to have the most detailed precision possible, while mixing, editing and/or mastering! Only highest quality components - like the 18cm Carbon/Paper woofer, and the unusual 28mm silk dome - are used to reach a perfectly matched system. In any combination of 2 - 6 channel systems we garanty a max pair difference of +- 0,5 dB A very extreme design feature to the violett HR is the very, very low x-over frequency of 1.200 Hz. We always try to go as low as possible in a two way system, because all woofers with a diameter over 10cm allready "break up" (uncontrolled polarity pattern) very early (1 kHz). A perfect system for all applications within a listening distance from 80 to 300cm the system The cabinet construction uses the bassreflex principle, the 28mm silk dome driver is mounted from the back of the front, leading into a radial wave guide. This guranties a perfect pattern, low distortion and smooth linearity over a wide range. The "liquid" front design (srew-, bumps-, dipless) support all the eminated enegie without disturbance. driver technologie As woofer/midrange driver we use a modified carbon-paper membrane driver of europes leading high Q driver manufacturer. It's the most non coloring chassis we ever had in hand, because a woofer that has to be still perfect at 1 kHz is quite a challenge! The most critical part in the VIOLETT's are the tweeters, these little drivers have to generate frequencies lower than 1,2 kHz!! We found only two companies who are able to design such - and we chosse - for sure - the best one! the electronics Two complete separated channel stripes are used to keep the electronic crosstalk to a minimum Each of these have identical amplifier - this means the tweeter has the same amount of power in the back as the woofer. A design feature that we never want to miss, because distortion created by different designs or varying power output is not what we want! Our s.c. "quick delivery" - digital power- supplies is build with the same goal in mind it works 2.000 times faster as analog one's and are way less heavy in weight. On the back you will find 16 step dips for the input sensitivity Click here for more info |
EMES Black TV HR Active monitorsEMES |
|
 |
Active nearfield for recording & project studio. Price per pair. CLICK HERE TO BUY BLACK tv HR active - Coaxial near field monitor 17cm polyprophylen driver with 25mm neodymium tweeter horizontal and vertical coil axes are congruent perfect imaging (matched systems with less than +/- 0,5 dB shielded version perfect for all screen orientated applications listening distance starting from as close as 50cm up to 250cm used for: RECORDING BROADCAST PROJECT STUDIO FILM/VIDEO Editing SOUND-Design MASTERING the system This 2 way coaxial system is housed in a compact bass reflex cabinet. Due to the nature of the coaxial driver the BLACKs can be placed in any position, without changing it's superior characteristics, upright, rotated at +/-90 degrees and 180. Two identical 100W amplifiers supply a homogenous fidelity. This is one of the reasons why this model can be used in nearly any pro audio application. The low frequency performance is excellent, and can be expanded if needed, by adding an EMES AMBER HR Sub. driver technologie For the woofer/midrange driver, we use a 17cm polypropylene membrane with low loss suspension. Inside the woofers coil/magnet system, we integrate a 25mm textile dome. By doing so we have created a 2-way driver where the two coils are mechanically time aligned and the sound field is generated as one! The complete magnet system of this driver is shielded by adding a second magnet and surrounded by a µ-metal cap! the electronics Two complete, separated channel strips are used to keep the electronic crosstalk to a minimum. Each of these has an identical amplifier - this means the tweeter has the same amount of power in the back as the woofer. A design feature that we never want to miss, because distortion created by different designs or varying power output is not what we want! Our so called "quick delivery" - digital power- supplies are built with the same goal in mind. It works 2,000 times faster than an analog device and is far lighter in weight. On the back you will find 16 step dip switches for the input sensitivity, low fq control (-6 to + 4 dB), and the high fq section (-4 to +4 dB) . System BLACK tv HR active : construction 2 way bass-reflex concept coaxial near filed monitor fc responce free field 43 - 20.000 Hz +/- 2,5 dB fc responce in wall not recommended system low fc responce 42 Hz - 3 dB max. sensitivity 107 dB max. sensitivity long term 105 dB harmonic distortion at SPL 100Hz 0,4 % Bass driver 1 x 17cm polyprophylen Midrange driver - Hf driver 25mm textile neodymium shielded (anti magnetic) yes weight 8,4 Kg dimensions w/h/d in mm 210 x 380 x 250 mm pair difference +/- 0,5 dB Electronic BLACK tv HR active number of amplifier 2 power handling rms Lf/Hf 2 x 100 W power handling peak Lf/Hf 2 x 120 W connector type XLR (female) input impedance 10 kOhm input sensitivity 16 steps, from 0,45 - 4,5V X-over fc 1,400 Hz low pass filter 35 Hz / - 18dB Hf level control 16 steps, from -4 dB - + 4 dB Lf gain control 16 steps, from -6 dB - + 4 dB distortion at acoustic max. output 0,1% signal to noise ration -102 dB kind of power supply digital operating voltage 115/230 V +/- 20% power consumtion at max. output 180 W. Click here for more info |
EMES Blue TV HR active monitorsEmes |
|
 |
Nearfield and Midfield for recording & mastering. Price per pair CLICK HERE TO BUY used for: RECORDING BROADCAST FILM/VIDEO Editing MASTERING SOUND-Design wide and smooth frequency responce extrem low distortion - even at high listening levels perfect imaging (matched systems with less than +- 0,5 dB 3 identical amplifier (in a 2 way system) We have designed this monitor for everyone that loves to have the most detailed precision possible, while mixing, editing and/or mastering! Only highest quality components - like the 18cm Carbon/Paper woofer, and the unusual 28mm silk dome - are used to reach a perfectly matched system. In any combination of 2 - 6 channel systems we garanty a max pair difference of +- 0,5 dB A very extreme design feature to the violett HR is the very, very low x-over frequency of 1.200 Hz. We always try to go as low as possible in a two way system, because all woofers with a diameter over 10cm allready "break up" (uncontrolled polarity pattern) very early (1 kHz). the system The cabinet construction uses the bassreflex principle, the 28mm silk dome driver is mounted from the back of the front, leading into a radial wave guide. This guranties a perfect pattern, low distortion and smooth linearity over a wide range. The "liquid" front design (srew-, bumps-, dipless) support all the eminated enegie without disturbance. driver technologie As woofer/midrange driver we use a modified carbon-paper membrane driver of europes leading high Q driver manufacturer. It's the most non coloring chassis we ever had in hand, because a woofer that has to be still perfect at 1 kHz is quite a challenge! The most critical part in the VIOLETT's are the tweeters, these little drivers have to generate frequencies lower than 1,2 kHz!! We found only two companies who are able to design such - and we chosse - for sure - the best one! the electronics Two complete separated channel stripes are used to keep the electronic crosstalk to a minimum Each of these have identical amplifier - this means the tweeter has the same amount of power in the back as the woofer. A design feature that we never want to miss, because distortion created by different designs or varying power output is not what we want! Our s.c. "quick delivery" - digital power- supplies is build with the same goal in mind it works 2.000 times faster as analog one's and are way less heavy in weight. On the back you will find 16 step dips for the input sensitivity, for low fc control (-6 to + 4 dB), and the hf-section (-4 to +4 dB. System BLUE HR active construction 2 way bass-reflex concept D'Appolito Monitor with Wave-guide fc responce free field 38 - 20.000 Hz +/- 1,5 dB fc responce in wall 38 - 20.000 Hz +/- 1,5 dB system low fc responce 36 Hz - 3 dB max. sensitivity 110 dB max. sensitivity long term 107 dB harmonic distortion at SPL 100Hz 0,4 % Bass driver 2 x 8" carbon paper Midrange driver - Hf driver 28mm Silk dome shielded (anti magnetic) - weight 19,4 Kg dimensions w/h/d in mm 480 x 250 x 300 mm pair difference +/- 0,5 dB Electronic BLUE HR active number of amplifier 3 power handling rms Lf/Hf 3 x 100 W power handling peak Lf/Hf 3 x 120 W connector type XLR (female) input impedance 10 kOhm input sensitivity 16 steps, from 0,45 - 4,5V X-over fc 1,200 Hz low pass filter 35 Hz / - 18dB Hf level control 16 steps, from -4 dB - + 4 dB Lf gain control 16 steps, from -6 dB - + 4 dB distortion at acoustic max. output 0,1% signal to noise ration -100 dB kind of power supply analog operating voltage 115/230 V +/- 20% power consumtion at max. output 300 W Click here for more info |
EMES Pink Active monitorsEmes |
|
 |
Active nearfield for recording & project studio's. Price per pair. CLICK HERE TO BUY PINK tv active - ONE & ONE active near field monitor compact dimensions (170x290x200mm) very low distortion - even at high listening levels perfect imaging (matched systems with less than +- 0,5 dB) radial waveguide in front of the tweeter shielded against magnetic interference listening distance: 60 - 250cm used for: RECORDING BROADCAST PROJECT STUDIO FILM/VIDEO Editing SOUND-Design the system The Pink uses the bassreflex principle. A 25mm neodymium dome driver is mounted from the back to the baffle, leading into a radial wave guide. This guranties a perfect polar pattern, low distortion and smooth linearity over a wide range. The "liquid" front design (srew-, bump-, dipless) support all the eminated energie without disturbance.Two identical 80W amplifier are used in the High - and Low frequency section. Our "little" Pink tv active has all the design features we offer with the "big" ones! driver technologie In the Low Frequency section a shielded 14cm driver is used. We choose this driver, because of it's outstanding accelleration performance - which means it can deliver a real "punch". The membrane is a composite made from paper, fibreglas and kevlar. This keeps the membrane as stiff as possible, while still being very light in weight. Also very unusal is the mechanical "air flow-design" which nearly eliminates air compression inside the driver itself! The 25mm neodymium tweeter is a masterpiece of it's own - total weight 300gr., while performing like a big one! the electronics Two complete separated channel stripes are used to keep the electronic crosstalk to a minimum. Each of these have identical amplifier - this means the tweeter has the same amount of power in the back as the woofer 2 x 80W peak. A design feature that we never want to miss, because distortion created by different designs or varying power output is not what we want! Our s.c. "quick delivery" - digital power- supplies is build with the same goal in mind it works 2.000 times faster as analog one's and are way less in weight. On the back you will find 16 step dips for the input sensitivity, for low fc control (-6 to + 4 dB), and the hf-section (-4 to +4 dB.) System PINK tv active construction 2 way bass-reflex concept One & One Monitor with Wave-guide fc responce free field 58 - 20.000 Hz +/- 2 dB fc responce in wall 58 - 20.000 Hz +/- 1,5 dB system low fc responce 56 Hz - 3 dB max. sensitivity 108 dB max. sensitivity long term 106 dB harmonic distortion at SPL 100Hz 0,4 % Bass driver 1 x 5" fibre composite Midrange driver - Hf driver 25mm Neodymium shielded (anti magnetic) yes weight 5,5 Kg dimensions w/h/d in mm 170 x 290 x 200 mm pair difference +/- 0,5 dB Electronic PINK tv active number of amplifier 2 power handling rms Lf/Hf 2 x 60 W power handling peak Lf/Hf 2 x 80 W connector type XLR (female) input impedance 10 kOhm input sensitivity 16 steps, from 0,45 - 4,5V X-over fc 1,500 Hz low pass filter 35 Hz / - 18dB Hf level control 16 steps, from -4 dB - + 4 dB Lf gain control 16 steps, from -6 dB - + 4 dB distortion at acoustic max. output 0,1% signal to noise ration -102 dB kind of power supply digital operating voltage 115/230 V +/- 20% power consumtion at max. output 180 W. Click here for more info |
EMES Violett active monitorsEmes |
|
 |
Active nearfield for broadcast, recording & project studio. Price per pair. CLICK HERE TO BUY ONE & ONE near field monitor wide and smooth frequency responce extrem low distortion - even at high listening levels perfect imaging (matched systems with less than +- 0,5 dB We have designed this monitor for everyone that loves to have the most detailed precision possible, while mixing, editing and/or mastering! Only highest quality components - like the 18cm Carbon/Paper woofer, and the unusual 28mm silk dome - are used to reach a perfectly matched system. In any combination of 2 - 6 channel systems we garanty a max pair difference of +- 0,5 dB A very extreme design feature to the violett HR is the very, very low x-over frequency of 1.200 Hz. We always try to go as low as possible in a two way system, because all woofers with a diameter over 10cm allready "break up" (uncontrolled polarity pattern) very early (1 kHz). A perfect system for all applications within a listening distance from 80 to 300cm the system The cabinet construction uses the bassreflex principle, the 28mm silk dome driver is mounted from the back of the front, leading into a radial wave guide. This guranties a perfect pattern, low distortion and smooth linearity over a wide range. The "liquid" front design (srew-, bumps-, dipless) support all the eminated enegie without disturbance. driver technologie As woofer/midrange driver we use a modified carbon-paper membrane driver of europes leading high Q driver manufacturer. It's the most non coloring chassis we ever had in hand, because a woofer that has to be still perfect at 1 kHz is quite a challenge! The most critical part in the VIOLETT's are the tweeters, these little drivers have to generate frequencies lower than 1,2 kHz!! We found only two companies who are able to design such - and we chosse - for sure - the best one! the electronics Two complete separated channel stripes are used to keep the electronic crosstalk to a minimum Each of these have identical amplifier - this means the tweeter has the same amount of power in the back as the woofer. A design feature that we never want to miss, because distortion created by different designs or varying power output is not what we want! Our s.c. "quick delivery" - digital power- supplies is build with the same goal in mind it works 2.000 times faster as analog one's and are way less heavy in weight. On the back you will find 16 step dips for the input sensitivity, for low fc control (-6 to + 4 dB), and the hf-section (-4 to +4 dB. System VIOLETT HR active construction 2 way bass-reflex concept One & One Monitor with Wave-guide fc responce free field 58 - 20.000 Hz +/- 2 dB fc responce in wall 55 - 20.000 Hz +/- 1,5 dB system low fc responce 52 Hz - 3 dB max. sensitivity 107 dB max. sensitivity long term 105 dB harmonic distortion at SPL 100Hz 0,4 % Bass driver 1 x 8" carbon paper Midrange driver - Hf driver 28mm Neodyme shielded (anti magnetic) - weight 14,6 Kg dimensions w/h/d in mm 210 x 380 x 250 mm pair difference +/- 0,5 dB Electronic VIOLETT HR active number of amplifier 2 power handling rms Lf/Hf 2 x 100 W power handling peak Lf/Hf 2 x 120 W connector type XLR (female) input impedance 10 kOhm input sensitivity 16 steps, from 0,45 - 4,5V X-over fc 1,100 Hz low pass filter 35 Hz / - 18dB Hf level control 16 steps, from -4 dB - + 4 dB Lf gain control 16 steps, from -6 dB - + 4 dB distortion at acoustic max. output 0,1% signal to noise ration -102 dB kind of power supply digital operating voltage 115/230 V +/- 20% power consumtion at max. output 180 W Click here for more info |
Genelec Carry Handles for 1032/S30/37/38Genelec |
|
 |
Carry Handles for Genelec 1032A. CLICK HERE TO BUY Carry handles for the Genelec 1032A professional studio monitor. Click here for more info |
Genelec Shielding Kit for 1030AGenelec |
|
 |
Magnetic shield upgrade kit for Genelec 1030A (Each). (Available for old models not shielded.) CLICK HERE TO BUY Magnetic shield upgrade kit for Genelec 1030A (Each). (Available for old models not shielded.) Click here for more info |
Genelec Grille Cover for 1030AGenelec |
|
 |
Grille Cover for Genelec 1030A (Each). CLICK HERE TO BUY Grille Cover for Genelec 1030A (Each). Click here for more info |
Genelec Magnetic Shielding Kit for 1031AGenelec |
|
 |
Genelec magnetic shielding upgrade kit for 1031A (for older models without magnetic shielding). CLICK HERE TO BUY Click here for more info |
Genelec Grille Cover for 1031AGenelec |
|
 |
Grille Cover for Genelec 1031A (Each). CLICK HERE TO BUY Grille cover for the Genelec 1031A professional studio monitor. Price shown is for a SINGLE grille cover. Image for guidance only. Click here for more info |
Genelec Shielding Kit for 1032AGenelec |
|
 |
Magnetic shielding upgrade kit for Genelec 1032A (Each). (For old models not shielded.) CLICK HERE TO BUY Magnetic shielding upgrade kit for Genelec 1032A (Each). (For old models not shielded.) Image for guidance only. Click here for more info |
Genelec Grille Cover for 1032AGenelec |
|
 |
Grille Cover for Genelec 1032A (Each). CLICK HERE TO BUY Grille Cover for Genelec 1032A (Each). Image shown for guidance only. Click here for more info |
returned - Page 1 of 0